整机功能介绍

PerformanceCharacteristicsofTheWholeMachine

前缘吸附送纸，风量可调，主机变频控制。

PLC电脑相位电动调整，各连接部气动锁定，电动分合，

精磨齿轮，齿轮润滑采用喷淋式循环润滑，免键结构锁紧，

套色准确，印刷图案精美。

使用和维修方便，自动化程度较高、高效率生产等。

The whole vacuum transfer design，full version printing with high definition.
Lead-edge suction feeding system，adjustable air volume，frequency convertor main motor.
Phase electric adjustment by PLC , connection unit locking by pneumatic,electrically control the separation and combination of machine.
Well grinded gear with spray lubrication system，Gears adopt keyless connection.
Chromatically multicolor printing accurately , printing effect beautiful.
Easy operation and convenient maintenance，high degree of automation，high effciency production.

技术参数(SPECIFCATIONS)

机型Model	TSG-2S-920	TSG-2S-1224	TSG-2S-1424	TSG-2S-1628
机械最高速度（张/分） Max.MachineSpeed(pcs/minute)	280	230	200	180
最大进纸尺寸 Max.FeedingSize(mm)	900×2000	1200×2400	1400×2400	1600×2800
最大隔张送纸尺寸 JumpFeedMax.CardboardSize(mm)	1200×2000	1500×2400	1600×2400	1900×2800
最小进纸尺寸 Min.CardboardSize(mm)	300×600	365×600	400×600	450×600
最大有效印刷面积 Max.PrintingSize	900×1960	1200×2360	1400×2360	1600×2760
最小开槽间隙（正刀） MinSlotterBladeSpace(sameside)(mm)	150×150×150×150	150×150×150×150	150×150×150×150	150×150×150×150
最小开槽间隙（反刀） MinSlotterBladeSpace(againstside)(mm)	240×65×240×65	260×65×260×65	260×65×260×65	260×65×260×65
最大开槽深度 MaxSlottingDeep(mm)	250	300	350	400

注：产品的规格更改或机构改良，恕不另行通知。

Notes:Wewillnotgiveanotheradviceifwehavecorrectedthespecificationsoftheproductsorimprovedthemechanisms.

送纸单元FeederUnit

可连续或隔张送纸（有计数器）。
变频控制真空气流和压力，以配合纸板尺寸。
可调整送纸行程，减轻拉纸胶辊压力。
拉纸胶辊间隙，左右挡纸板位置，电脑控制调整。
后托纸架电脑控制前后，加快设置速度。
多排毛刷及风机清除纸板表面纸屑，提高印刷品质。
送纸压力辊间隙调整采用电脑控制，控制范围0-12mm。
压力辊的动力传动采用凸轮轴承传动，减少磨损使传动更平稳。
主机马达启动保护装置。
送纸单元、印刷单元采用编码器自动归零。
一般纸箱使用自动归零装置，试印二张即可调整至正确位置，减少纸板浪费。

Can be continuous feeding and skip feeding.
Inverter control the vacuum air and presure,to follow the cardboard size.
Can adjust the feeding proceding to reduce the presure of pushing roller.
Computer control the gap of pushing rollers  and the position of both sides guard.
Backside stacker computer control front and backside,increse the speed of set up.
Two wire brush and fan cleanning the scraps of paper in surface of the cardboard.To increase the printing quality.
The adjustment of the gap of  pushing rollers adopts computure control,between 0-12mm.
The power transmission system adopts cam bearing transmission,in order to reduce the abrasion and make the transmission more steady Protector of  main motor start(The main motor can not start when the machine didn't lock well).
Feeder Unit and Printer Unit adopt encoder making zero.
Ordinary carton producing can use making zero automatic device.The correct position can be adjusted by test printing of few cardboards.In order to not waste cardboard.

真空传送印刷单元VacuumTransferPrintingUnit

印刷辊为优质钢，表面研磨，镀硬铬。
装卸印刷板，脚踏开关电动控制正反转。
采用真空吸附输送纸板(送纸轮表面为陶瓷、增加耐磨及寿命)。
不必使用拉纸环就可以使纸板通过印刷部。
压印辊间隙调整采用电脑及电子数字式控制，控制范围0-12mm。
印刷相位固定装置，电磁离合器制动式刹车机构。当单元分离调整相位或清洗时，刹车机构限制齿轮转动，保持原有齿轮位置固定点。横向相位采用电脑控制，控制范围±10mm。
清洗印版后自动复位系统。
气压式单隔膜泵，供墨稳定，操作保养简单。
腔刮刀供墨系统下配有墨槽。
自动切换清洗装置，让水墨回收更彻底。

The printing rollers are made of high quality steel, hard chrome plating,surface grinding.
Pedal switch control the printing roller turning forward or back off when install the printing sheet.
Adopts vacuum transfer(The surface of the transfer wheel is made by ceramic,in order to increase the rub and using life).Can transfer the cardboard without transfer roller.
The adjustment of the  Printing presure rollers space adopts computure control,between 0-12mm.
Immobilization device of the printing phose.Electromagnetic clutch brake type brake mechanism.The Brake mechanism to limit gear rotation,Maintain the fixed position of the original gear when the units seperate or adjust the phose and cleaning.
Horizontal phase using computer control,±10mm.
Automatic reset system after cleaning plate.
Pneumatic single diaphragm pump,Ink supply stability,Operationand maintenance is simple.
Ink tank is placed under the Single blade ink supply system.
Automatic switching cleaning device makes ink recycling more thorough.

开槽单元SlotterUnit

全电脑伺服调整，快，准，稳。
压线轴和开槽刀轴均为优质钢，研磨加工，表面镀硬铬。
第一压线轮，经预压线后的纸板不易压破。
上压线轮外表包裹优力胶，不损坏纸板。
压线及预压轮调整间隙采用电脑及电动数字式控制。
开槽刀轴间隙采用电动调整，调整范围0-12mm。
上刀座与下刀座采用传动轴联动，移动时保持上下刀对准，延长刀具寿命。
预压轮、压线轮、开槽刀座横移位置，采用电脑及电动数字控制。
开槽刀箱高调整有防碰撞保护装置，不会损坏机器。

弹性切角刀结构，可切断三层、五层纸板无需调整，操作方便。

Adoptservoadjustmert----fast,exact,andstable.

Adopt servo adjustmert ----fast, exact, and stable.

Creaser shaft and Slotter shaft adopt high quality steel,hard chrome plating,surface grinding.

The cardboard is not easy to be broken after creased by the first creaser wheel.

The upper creaser wheel is wrapped with rubber,avoid to damage the cardboard.

The  gap of pre-creaser and creaser wheels adopt computerized and digita control.

The interval of slotter shaft adopt motorized control.the adjustment range is 0 -12mm.

The upper blade tool base and the lower blade tool base adopt the drive shaft linkage, keep the upper and lower blades alignment while moving, and extend the tool life.

Pre-creaser wheel, pre-creaser wheel,creaser wheel and slotter tool base displacement position, adopt computerized and electric digital control. Collision protect device is adopted for slotter blade height,avoid to damage the machine.

Elastic corner cutting blade structure,can cut 3 layers ans 5 layers cardboard without adjustment,easy operation.

模切单元DiecutterUnit

刀模辊为优质钢，表面研磨，镀硬铬。
平衡校正，增加运转稳定性。
胶垫辊为优质钢，表面研磨，镀硬铬。
平衡校正，增加运转稳定性。
导纸辊间隙采用电脑及电动数字式控制。
行星齿轮式构造。
模切相位采用电脑及电动数字控制360度调整（运转、停止均可调整）。
横向相位采用电脑及电动数字控制，控制范围±10mm。
胶垫辊补偿采用伺服补偿驱动，控制胶垫辊筒的速度，补偿范围±3mm。

The die roller is made of high quality steel, hard chrome plating,surface grinding.
Balance correction,Increase running stability .
The anvil roller is made of high quality steel, hard chrome plating,surface grinding.
Balance correction,Increase running stability .
Computure and digit control systerm are dopted for the  space of pushing roller.
Planetary gear structure.
Computure and digit control systerm are dopted for the die cutting phose,can adjust circle.
Computure and digit control systerm are dopted for the broadwise phose by ±10mm.
Anvil roller compensation adopts servo motor,to control the speed of the anvil roller.Compensation range ±3mm.